32
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
4
Complete the programming sequence by reading the ENTER/EXIT PROGRAMMING barcode
to exit Programming Mode.
For more detailed descriptions, programming information and examples for setting selected con-
figuration items, see
.
By default, the handheld will decode barcode labels only when they are
close to the center of the aiming pattern. This allows the handheld to accu-
rately target labels when they are placed close together, such as on a pick
sheet. See
Global Interface
Features
The following interface features are configurable by all interface types.
Host Commands — Obey/Ignore
This option specifies whether the reader will obey or ignore host commands. When set to ignore,
the reader will ignore all host commands except for those necessary for:
- service mode
- flash programming mode
- keeping the interface active
- transmission of labels.
DEFAULT
$CIFIH00(CR)
Host Commands = Obey
(Do Not Ignore Host Commands)
$CIFIH01(CR)
Host Commands = Ignore
USB Suspend
Mode
This setting enables/disables the ability of USB interfaces to enter suspend mode.
DEFAULT
CUSSE00(C
USB Suspend Mode = Disable
$CUSSE01(C
USB Suspend Mode = Enable
