86
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
Multiple Labels Ordering by Code Symbology
This feature allows you to specify the order multiple labels are transmitted by symbology type,
when Multiple Labels per Frame is enabled. See
in “References” for detailed information
on setting this feature.
$CSNMS
Select Symbologies for Multiple Labels
Ordering
To configure this feature, scan the ENTER/
EXIT PROGRAMMING MODE barcode
above, then the barcode at left followed by
the digits From the alphanumeric characters
In Appendix d, keypad representing your
desired Character(s). end by reading the
enter/exit barcode again.
Make a mistake? Scan the CANCEL barcode
to abort and not save the entry string. You
can then start again at the beginning.
~
CANCEL
DEFAULT
000000000000 = Random order
Multiple Labels Ordering by Code Length
Specifies the transmission ordering by code length, when Multiple Labels per Frame is enabled.
DEFAULT
$CSN-
Multiple Labels Ordering = Disable
$CSN-
Transmit Increasing Length Order
$CSN-
Transmit Decreasing Length Order
