Balluff BTL6-V11V Series, Configuration Manual, Page: 24 / 40

4 english
Symbols and conventions 1.1
Handling instructions are indicated by a preceding
triangle. The result of an action is indicated by an arrow.
Handling instruction 1
►
Handling result
⇒
Handling sequences
are numbered consecutively:
Handling instruction 1 1.
Handling instruction 2 2.
Buttons are shown in angle brackets, e.g. “Confirm with
<Enter>”.
Button combinations
are buttons that must be pressed
simultaneously. They are connected with a plus sign, e.g.
<Ctrl> + <O>.
Buttons are described in small caps, e.g. U
pdate the
transdUcer
.
Menu commands are linked with a greater-than sign, e.g.
“Settings > Options” stands for the “Options” menu
command from the “Settings” menu.
Note, tip
This symbol indicates general notes.
Abbreviations 1.2
CAS Control Address Space
FPGA Field Programmable Gate Array
MAS Memory Address Space
PHY Physical Layer Chip with Media
Independent Interface
PLL Phase-Locked Loop
VARAN Versatile Automation Random Access
Network
VNO VARAN Bus User Organization
Notes to the user
1
BTL6-V11V-...
Configuration