Balluff BOS R254K-UUI-RH10-S4, Configuration Manual

Page: 211 / 214

www.balluff.com 103 english
7.8 Profile Characteristic
7.8.1 Description
Profile Characteristic is a readable parameter that provides
information about which IO-Link profiles are supported. It
is used mainly to allow profile function modules of the
control unit to detect which profile or functions on the
device are available.
This parameter is defined in the IO-Link specification.
7.8.2 ISDU
Name Index Subindex Access Variant Length Data
Type
Data
Storage
Default
Profile Characteristic 0x000D (13) 0 R 1 12 bytes UINT16[] n/a –
2…5 20 bytes
Tab. 7-28: Profile Characteristic – ISDU
The parameter can be read via subindex 0 and consists of
multiple profile indices and function classes.
If a profile ID is specified, this means that all included
function classes are supported. If only sub-functions are
specified, these are output explicitly as an individual
function class (16-bit values in each case).
The following function classes are supported:
Variant Function Class ID Name / Description
1 0x0007 SSP 2.4 = Adjustable Switching Sensor, single value teach, disable function
0x0008 SSP 2.5 = Adjustable Switching Sensor, two value teach, disable function
0x0009 SSP 2.6 = Adjustable Switching Sensor, dynamic teach, disable function
0x0030 BLOB
0x0031 FW-Update
0x4000 Identification and Diagnosis
2…5 0x0001 Generic Profiled Sensor
0x0030 BLOB
0x0031 FW-Update
0x4000 Identification and Diagnosis
0x8001 SSC, type 0 Generic Profiled Sensor
0x8004 Teach Channel
0x8007 Teach-in Single Value
0x8008 Teach-in Two Value
0x8009 Teach-in Dynamic
0x800C Transducer Disable
Tab. 7-29: Profile Characteristic – supported function classes
7
System Functions (continued)
All individual functions are described in this guide.
For more exact descriptions of the profiles, refer to the
corresponding profile specifications (see www.io-link.com).
BOS R254K-UUI-RH10-S4
Photoelectric Sensors