Balluff BOS R254K-UUI-RH10-S4, Configuration Manual

Page: 192 / 214

84 english
The objective of this function is the detection of larger
vibration deviations that arise between normal and
abnormal operation as well as the detection of trends
(change of the values over time).
The accuracy of the measurement is limited by the
application, because the device is mounted to perform the
primary function (e.g., optical distance measurement) and
not as a sensor for vibration measurement. Thus, not only
the vibrations of the vibration source that is to be
measured, but also the vibrations of the entire mechanical
system are measured.
This function is based on the ISO-10816-3 standard, but
for a detailed vibration analysis Balluff offers special
sensors.
The product family is designed such that it offers complete
monitoring functionality, whereby the status monitoring is
the primary function of the sensor and it is mounted on the
object or on the machine.
Fig. 6-11: Trend analysis
6.13.3 Process Data
Object ID Name Description Direction
0x004A (74) Vibration Level Vibration level Input
0x004B (75) Vibration Alarm Status Vibration alarm status Input
Tab. 6-63: Vibration detection – Process data
The unit for Vibration Level is [mm/s]
The vibration alarm status flag is without units.
6.13.4 ISDU
Name Index Subindex Access Length Data
Type
Data Storage Default
Vibration Level 0x210E
(8462)
0 R 4 bytes FLOAT32 n/a –
Vibration Alarm
Configuration
0x210F
(8463)
0 R/W 5 bytes Yes
Vibration Alarm Enable 1 R/W 1 byte BOOL No 0
Vibration Alarm Threshold 2 R/W 4 bytes FLOAT32 No 0.0
Vibration Alarm Status 0x2110
(8464)
0 R 1 byte BOOL n/a –
Tab. 6-64: Vibration detection – ISDU
6
Secondary Device Functions (continued)
BOS R254K-UUI-RH10-S4
Photoelectric Sensors