Balluff BNI EIP-508-105-Z067, Configuration Manual

Page: 67 / 88

www.balluff.com 23 english
5
Display (continued)
5.10 Edit mode
Fig. 5-5:
Edit mode
Edit mode
1. In the Network Config menu select IP/subnet or
gateway address.
2. Hold down the Set button to change to Edit mode.
3.
Press the arrow button briefly to change the number.
4.
Briefly press the Set button to go to the next position.
5. After the last position briefly press the Set button to go
to the next octet of the address or to apply the new
number after the last octet.
The module must be restarted to work with the
new configuration.
5.11 Module information
Fig. 5-6: Module information
►
Scroll through the M
Odule infOrMatiOn
menu by briefly
pressing the arrow button.
The information displayed is the product name, module
updates and MacID.
BNI EIP-508-105-Z067
Network interface