Balluff BNI EIP-508-105-Z067, Configuration Manual

Page: 61 / 88

www.balluff.com 17 english
4
Process data
4.1 Process data inputs
The input data have a size of 392 bytes. The table below
shows the assignment of the process data inputs.
Byte Module part Description
0…7 Standard I/O
ports
Process data inputs for the
standard inputs
8…55 IO-Link Port 0 Process data inputs for the
IO-Link Port 0
56…103 IO-Link Port 1 Process data inputs for the
IO-Link Port 1
104…151 IO-Link Port 2 Process data inputs for the
IO-Link Port 2
152…199 IO-Link Port 3 Process data inputs for the
IO-Link Port 3
200…247 IO-Link Port 4 Process data inputs for the
IO-Link Port 4
248…295 IO-Link Port 5 Process data inputs for the
IO-Link Port 5
296…343 IO-Link Port 6 Process data inputs for the
IO-Link Port 6
344…391 IO-Link Port 7 Process data inputs for the
IO-Link Port 7
Tab. 4-1: Process data inputs BNI EIP-508-105-Z067
4.1.1 Standard input data
Byte Bit Description
7 6 5 4 3 2 1 0
0 I32 I34 I22 I24 I12 I14 I02 I04 Input data
I04: Input for port 0, pin 4
The result is only 0 when the port is configured as an
IO-Link Port.
1 I72 I74 I62 I64 I52 I54 I42 I44
2 S3 S2 S1 S0 Short circuit status
Short circuit between pin 1 and 3 at reported port
3 S7 S6 S5 S4
4 O32 O34 O22 O24 O12 O14 O02 O04 Overload status
O04: Overload at port 0, pin 4
Only if the port is configured as an output.
5 O72 O74 O62 O64 O52 O54 O42 O44
6 0 0 0 0 0 NA PS PA Status of power supply
NA: No actuator supply
PS: Power supply of sensor
PA: Power supply of actuator
7 0 0 0 0 0 0 0 0 reserved
Tab. 4-2: Standard input data
BNI EIP-508-105-Z067
Network interface