BIS U-602_ Processor Unit
TCP/IP / RS232
18
The "BIS UHF Manager" configuration software forms the basis for incorporating the processor
unit into the network. "BIS UHF Manager" is a software package that enables the configuration
of the processor unit prior to installation. This requires that the processor unit be connected via
connections X3 or X4 to a computer where "BIS UHF Manager" must be installed.
You can find the "BIS UHF Manager" software on the BIS software CD provided or on the Inter-
net at
.
►
Start "BIS UHF Manager".
⇒
If "Connect on startup" was selected in the "Interface Settings" window (factory setting),
the device automatically attempts to establish the last known connection.
If the device is able to establish the last known connection, "BIS connected..." appears in the
status bar.
If the device is not able to establish a connection, "BIS not connected..." appears in the status
bar. The device must be connected manually:
►
Click "Program Settings" and "Interface" in the menu bar.
⇒
The "Interface Settings" window opens.
6.1 UHF Manager
6
Network Connection
Summary of Contents for BIS U-6020-053-10 RS232
Page 2: ...www balluff com...
