Balluff BIS M-370-000-A02, Manual, Page: 70 / 198

CONFIGURATION METHODS
63
4
4.2.1 Configuration Using
Balluff Dashboard™
The
Balluff
Dashboard™ Configuration Tool
is a software application that allows users to
view, modify, save and update the configuration settings of their BIS M-62_ processor units.
Follow the instructions below to operate the
Balluff Dashboard™ Configuration Tool
and to
set the BIS M-
62_ device’s configuration.
1. Install the Processor unit as described in the relevant sub-paragraph in 2.6.
2. Connect the Processor unit to your PC, power up and wait for the boot procedure to
finish.
3. Run the
Balluff Dashboard™
.
4. From the Connection screen, choose your processor unit from the list.
Figure 43 -
Balluff Dashboard™ HF RS232 Processor unit Selection
5. Choose the appropriate COM port and Baudrate, (or IP Address for Ethernet models);
then
click “Connect”.