www.balluff.com
BIS C-87_
Handheld Programmer
27
Operation
5
Loading files
5.8 Connecting the
Handheld
Programmer to a
PC/laptop
Data
transmission
Charge life
Switch to the
►
"File Browser"
tab.
Switch to the
►
"File Browser"
tab.
Tap on
►
[Open]
.
The
⇒
"Open"
dialog opens.
Select file and confirm with
►
[OK]
.
The saved data are read and displa-
⇒
yed on the
"RW Data"
tab.
Fig. 30: Loading files
The Handheld Programmer can optionally be connected to a PC/laptop using Bluetooth, WLAN,
or USB (docking station).
Files can be sent between the Handheld Programmer and PC/laptop using the
"ActiveSync"
software.
Note
Depending on the installed option, refer to the WORKABOUT PRO operating manual
for the exact procedure for connecting the Handheld Programmer to the PC. Opera-
tion of the
"ActiveSync"
software is described in its online help.
Connect Handheld Programmer to PC.
►
In
►
"ActiveSync"
(PC) select the
"Search device"
menu option.
or
In Windows Explorer (PC), navigate to the
►
"Mobile device"
entry.
From Explorer you can exchange files between the PC and WORKABOUT PRO.
►
Note
A rechargeable battery with high capacity has a battery life of up to 48 hours after a
full charge. Prerequisite: 200 read/write operations, after 3 min. without being used,
the device enters Suspend Mode. Data in the Handheld Programmer are retained for
at least 10 to 15 minutes while the battery is being replaced.