Balluff BIP LD2-T017-01-EP-S4 Series, User Manual

Page: 43 / 212

6
IO-Link interface (continued)
6.2 Communication parameters
Specification IO-Link Description Value
Transfer rate COM2 38.4 kBaud
Minimum cycle time of device min cycle time 0x1E (3 ms)
Frame specification
– Amount of preoperate data required
– Amount of operate data required
– Enhanced parameters M-Sequence Capability:
– M-Sequence Type Preoperate
– M-Sequence Type Operate
– ISDU supported 0x19
2 bytes
1 byte
Supported
IO-Link protocol version Revision ID 0x11 (Version 1.1)
IO-Link profile Profile Smart Sensor Profile 10042_V1.0
Amount of process data
from the device to the master
ProcessDataIn 0x83 (bytes)
Amount of process data
from the master to the device
ProcessDataOut 0x00 (4 bits)
Manufacturer ID Vendor ID 0x378
Device identification Device ID 0x020309
Tab. 6-1: Device specification
Transfer times
Process data cycle with 1.0 master Amount of PD x master cycle time = 2 x 3 ms = 6 ms
Process data cycle with 1.1 master Master cycle time = 3 ms
Tab. 6-2: Device transfer times
www.balluff.com 11 english
BIP LD2-T017-01-EP _ _ / EP _ _ -S4
Inductive Positioning System