Balluff BES M08EH1-L01C20B-S04G-L04, Configuration Manual

Page: 107 / 194

www.balluff.com 9 english
3.2 Device Variants
The following three variants are available, which differ in
their process data profiles:
– LSSC
– AdSS
– Comprehensive Condition Monitoring
The functions remain unchanged in the process. The
switching profile is influenced by a change between LSSC
and AdSS. Only one switching point is available in the
AdSS profile.
Variant Device ID Baud rate No. of
PDInput
No. of
PDOutput
IO-Link protocol
version
Minimum
cycle time
Variant 1 (LSSC) 0x020404 COM3 (230.4 kbits/s) 1 byte – 1.1.2. 2 ms
Variant 2 (ADSS)
1)
0x020405 COM3 (230.4 kbits/s) 1 byte – 1.1.2. 2 ms
Variant 3 (CCM) 0x020406 COM3 (230.4 kbits/s) 17 byte 1 byte 1.1.2. 2 ms
1)
Default
Tab. 3-1: Device Variants
3.3 Process Data Profiles
See section 6.7 Process Data Info and Configuration on
page 91.
Variant 1 (LSSC)
PD Input
Byte 0
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
System error Reserved Transducer
out of range
Signal Quality
Bad
Reserved Reserved SSC2
(LSSC2)
SSC1
(LSSC1)
Tab. 3-2: Process data profile for PD Input – Variant 1 (LSSC)
PD Output
No PD-Output data available.
Variant 2 (ADSS)
PD Input
Byte 0
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
System error Reserved Transducer
out of range
Signal Quality
Bad
Reserved Reserved Reserved SSC1
(ADSS1)
Tab. 3-3: Process data profile for PD Input – Variant 2 (ADSS)
PD Output
No PD-Output data available.
3
Overview of IO-Link Data and Functions (continued)
BES M08EH1-L01C20B-S04G-L04 /BES M12E_1-L01C_0_-S04G-L04 /
BES M18EH1-L01C_ _ _-S04G-L04
Inductive sensors