Se lec tion of a pa ra me ter
•
se lect the pa ra me ter by pres sing “+” -bu tton oder “-” -bu tton
•
Con firm the pa ra me ter by pres sing the “P” -bu tton.
•
The dis play shows the last pro gram med va lue of the se lec ted pa ra me ter
Change and con firm a se lec ted pa ra me ter
•
Change the pa ra me ter by pres sing the “+” -bu tton or the “-” -bu tton
• Se lect the dis play de ca de to be chan ged by pres sing the “*” -bu tton
•
Con firm the pa ra me ter by pres sing the “P” -bu tton
•
The dis play shows the pro gram ming level and the num ber of the pa ra me ter
e.g.: “0-04" => pa ra me ter 4
7.1.
Programming level for configuration 0-00
Param.
Description
Range
Default
Value
0-00
Input range
0 -> Voltage 0 bis 10 V
1 -> Current 0 bis 20 mA
2 -> Current 4 bis 20 mA
0 .. 2
0
0-01
Display value of min. input signal
-999 .. +9999
0
0-02
Display value of max. input signal
-999 .. +9999
+1000
0-03
Decimal point
0 ->
XXXX
1 ->
XXX.X
2 ->
XX.XX
3 ->
X.XXX
0 .. 3
1
0-04
Tare on = 1, off = 0
0 .. 1
0
0End
Leaving programming level 0-00
11
7. Programming