Balluff BAE011H, User Manual, Page: 71 / 118

www.balluff.com
11
Serial interface (X3)
A serial interface (RS232 or RS485) is available at terminal X3.
This interface can be configured in the SERIAL MENU.
The serial interface RS232 or RS485 can be used:
•
for easy setup and commissioning of the units
•
to modify settings and parameters during operation
•
to read out internal states and actual measuring values by PC or PLC
The following drawing shows the connection to a PC by using a standard Sub-D-9
connector:
Connection of the
RS232
interface:
Connection of the RS485- interface:
Important: Parallel operation of RS232 and RS485 is not allowed!