background image

PRODUCT NAME: Dani Outdoor Floor Lamp

ITEM NUMBER: LL315

DIMENSIONS OF ITEM ASSEMBLED: 66”H x 16” DIA

PRODUCTS ARE NOT INTENDED

FOR COMMERCIAL USE.

Page 1 of 4

Customer Service: 800-367-2810

Online: www.ballarddesigns.com

MADE IN CHINA

IMPORTANT SAFETY INSTRUCTIONS:

-This Lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk 

of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fully fit in 

the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an 

extension cord unless plug can be fully inserted. Do not alter the plug.
-These Assembly Instructions are provided for your safety. It is important that they are read carefully 

and completely before assembling this Lamp.
-This product must be installed with the applicable installation code by a person familiar with the 

construction and operation of the product.
-This Lamp has been rated for up to 100 Watt MAX Type A Bulb (Included or NOT Included).

WARNING:

-Deviation from these Assembly Instructions may result in a risk of fire or electric shock.
-To reduce risk of fire, electrical shock, or personal injury, always turn off and unplug Lamp and 

allow it to cool prior to replacing the bulb.
-Do not touch the bulb when the Lamp is turned on. Do not look directly at the lit bulb.
-Keep flammable material away from the lit bulb.

Summary of Contents for Dani Outdoor LL315

Page 1: ...lug can be fully inserted Do not alter the plug These Assembly Instructions are provided for your safety It is important that they are read carefully and completely before assembling this Lamp This product must be installed with the applicable installation code by a person familiar with the construction and operation of the product This Lamp has been rated for up to 100 Watt MAX Type A Bulb Includ...

Page 2: ...y all the parts out on a clean flat surface DO NOT discard any contents until after assembly and installation is complete to avoid accidentally discarding small parts or hardware Recommended Location for Use Outdoor wet Environment Assembly Time 20 Minutes People Required 2 people Tools Required Screwdriver Glass Base Lamp fixture Shade 1 Lamp Body A 1 Shade C 1 Finial B 1 Base E 1 Glass D BALLARD ...

Page 3: ...ficient enough Screw the Lamp Body A into the Base E until tight Slowly pull the wire out of the bottom of the base then stick the Pad F onto the bottom of the Base STEP 2 Customer Service 800 367 2810 Online www ballarddesigns com E F A Screw in Bulb This Lamp has been rated for up to a 100 Watt MAX Type A Bulb NOT Included ...

Page 4: ... Finial B and fix the Finial on top of the Shade C Place the Shade over the Glass D top Customer Service 800 367 2810 Online www ballarddesigns com Cleaning Care To clean wipe the Fixture with a soft dry cloth Avoid the use of harsh or abrasive chemicals as they may damage the finish Screw the Glass D onto the Lamp Body A until tight A D B C D STEP 4 ...

Reviews: