20
21
Pairing Your Remotes and Shades
Pairing Your Remotes and Shades
Pair a Remote with a Group of Shades
If you want to control a group of shades with one remote,
follow these steps.
Before you start, decide which remote you want to control the
group (known as the group remote). Note that you won’t be able to
control an individual shade with the group remote after you perform
these steps. You can always adjust the remote’s programming later.
1. Reset the group remote to make sure you start
with a clean slate.
a. Press and hold the program button on the back of
the remote for 15 seconds. When the LED stops
flashing, release the button.
The remote LED should flash green, amber, and red
before turning off.
b.
On the shade, press and hold the program
button for 7 seconds. When the shade jogs,
release the button.
2. Pair the group remote with the shade group.
a. On the group remote, quickly press
and release the program button on the
back twice.
The remote LED will flash amber and green.
b. On one of the shades in the group, press and hold
the program button for 3 seconds. When the LED
flashes green, release the button.
The shade will jog once, and the shade LED
will turn off. The shade is now paired with
the remote.
c. Repeat steps a–b for each shade
in the group.
If you want to control each shade individually as
well as in a group, follow the steps in the next
section.
x2
Pair a Second Remote with a Shade
If you paired a group of shades with a group remote in
the previous section, you might still want to control each
individual shade within that group with separate, individual
remotes. For example, you might want to control shades
as a group with a single-channel remote, but still be able
to control each shade individually with separate two-
button remotes. To do that, follow these steps.
1. On the group remote, quickly press
and release the program button on
the back twice.
The remote LED will flash amber and green.
2. On the individual remote, press and
hold the program button on the
back for 3 seconds. When the LED
flashes green, release the button.
The LEDs on both remotes will turn solid
green and then turn off.
3. On the individual remote, press
and release the program button on
the back.
The remote LED will flash green.
4. On the shade you want to pair
the individual remote with, press
and hold the program button for
3 seconds. When the shade LED
flashes green, release the button.
The LED on the individual remote will turn
green, and the shade will jog. Both of your
remotes will now control the shade.
5. Repeat steps 1–4 for each shade
you want to control with an
individual remote.
x2