Use and maintenance manual
Chipping machine BF150
6
1.3
INFORMATION ABOUT THE MACHINE
1.3.1
I
NTENDED USES
The models presented in this manual are exclusively designed for shredding and chipping branches,
pruning residues, brushwood, wood products in general in order to obtain chips and a uniform product
suitable for composting.
They also allow the reduction of the mass of wood-based plants so as to facilitate their disposal and
transport.
Any use other than that specified is considered improper.
The person operating the machine must always be positioned in front, close to the loading mouth.
Operating position
Machines powered by a cardan shaft must remain connected to the tractor at all times during use.
The machine cannot be used indoors.
These machines are usually used during the day. If use at night or in reduced visibility conditions is
required, a proper lighting system must be employed around the machine.
ATTENTION!
THE MACHINE MUST BE OPERATED BY ONE OPERATOR ONLY.
