Use and maintenance manual
Chipping machine BF150
5
1.1
ABOUT THIS MANUAL
This manual provides all the information for the use and maintenance of the machine. Good operation
and longevity will depend on good maintenance and careful use. It is recommended that you read this
Use and Maintenance Manual carefully, and strictly follow the instructions described before any use,
check and operation to be carried out with and on the machine.
The manual (together with the CE Declaration of Conformity) is to be considered an integral part of the
machine and must always accompany it even in the event of resale.
The topics covered in this manual on the safe use of the chipping machine are those expressly required
by the “Machinery Directive” and the corresponding applicable technical standards (as far as relevant).
The manual was compiled in accordance with the regulations in force at the time of its printing.
SAFETY SYMBOL
This symbol highlights messages that are important for the safety and
security of the operator. When encountered, follow the instructions of the
message to which they refer in order to prevent accidents or injuries.
1.2
MACHINE IDENTIFICATION
On the frame of each machine a plate is attached
bearing the CE mark, the Manufacturer's data, the
model, the serial number, the year of construction and
the mass of the chipping machine.
The CE mark and the CE Declaration of Conformity
certify that the machine is built in accordance with the
“Machinery Directive”.
When requesting spare parts, always refer to the
machine type, serial number and year of construction
.
