VIGIL EVAS BVRD2M
Operating Instructions
22
BVRD2M issue 2
C O M M U N I C A T I O N S
3.4 N
AVIGATING
THE
M
ENU
S
TRUCTURE
AND
S
ETTING
P
ARAMETERS
The "Multi Function Encoder", "Left", "Right", "Select" and
"Back" buttons (as shown in Figure 3.1) are used to navigate
through the menu structure.
There are two conventions used throughtout the menu to indicate
A) an adjustable parameter, B) an available sub-menu.
Figure 3.2 — Cursor Operation
To alter the value of a parameter, move the cursor using the "Left"
and "Right" buttons until it is underlined. Rotate the Encoder
until the required value / option etc is displayed.
To select a sub-menu, move the cursor using the "Left" and
"Right" buttons until the first character is flashing and then press
the "Select" button.
The sub-menu will then be displayed.
To return to the previous menu, press the "Back" button.
There are some settings (such as Audio Output) where the
function can be assigned from a range of options. The currently
selected function is shown by a "*" next to the relevant menu.
N
OTE
: Some sub-menus may not be accessable depending on the Access
Level in use.
[Zone*][Listen ][Reserve ]
Audio O/P 01 (Aud OP 01 )
