VIGIL EVAS BVRD2M
Operating Instructions
BVRD2M issue 2
17
C O M M U N I C A T I O N S
2 Hardware Installation
The BVRD2M and BVRD2S are both housed in 1 unit 19" Rack
Mount chassis.
2.1 A
TTACHING
S
LAVE
UNIT
(
S
)
The BVRD2S slave unit(s) mount directly on top the master unit.
To minimise rack wiring, the power and communications
between master and slave units are via an internal data link.
Figure 2.1 — Data Link Connectors
C
AUTION
It is important that slide rails or rack runners are used to support
the weight of the unit(s) when installed.
