background image

BV225 Amplifier

Installation Instructions

BV225 Installation Manual issue 3

v

A

MENDMENT

 R

ECORD

P

ROPRIETARY

 N

OTICE

All data and information contained within this manual is of a 
proprietary nature with the exclusive title to the same held by 
Baldwin Boxall Communications Limited. The possession of this 
manual and the use of the information is, therefore, restricted 
only to those persons duly authorised by Baldwin Boxall 
Communications Limited.

Do not reproduce, transcribe, store in a retrieval system or 
translate into any language, any part of this manual without the 
prior permission of Baldwin Boxall Communications Limited.

In the interest of continual product development, Baldwin Boxall 
Communications Limited reserves the right to make changes to 
product specification without notice or liability. Use of Baldwin 
Boxall Communications Limited products as critical components 
in life support systems is not authorised except with express 
written approval from Baldwin Boxall Communications Limited.

Change Note 
Number

Nature of Amendment

Date of 
Amendment

DP190

Initial release: Issue 1

Oct 2010

ECR2501

Issue 2: Updated "Master" Parallel DIL SW settings   Feb 2011

ECR2768

Revised Specification

July 2013

Summary of Contents for BV225

















Reviews: