12
SB3115 R. 07/22
Balcrank™ Corporation · Weaverville, NC 28787 · 800-747-5300 · 800-763 0840 Fax · www.balcrank.com
EN
EN
STRAINER MAINTENANCE
TECHNICAL SPECIFICATIONS
WARNING:
Release all pressure within the system
and disconnect the air supply to the pump prior to
performing strainer replacement. Discharge pressure
operating the gun into an appropiate container and
open any bleeder-type air valves and fluid drain
valver in the system if necessary.
The gun can be provided with a strainer (optional). To
inspect strainer or make replacement read the
following procedure:
• Remove the cover (1) of the swivel and loosen the nut (2)
of the hose.
• Remove the o-ring (3), (4) and then the filter.
• Check the filter clean or replace as necessary.
• Place again the filter with the o-ring and install the hose
with the swivel cover.
!
Thread port
½” NPT
Moist parts materials
Acetal, stainless steel, NBR, aluminum, brass, zinc plated steel
Meter type
Oval gear
Flow rate
0.25 - 7.5 US gal/min (1-30 l/min)
Maximum pressure
1450 psi (100 bar)
Temperature range
14 a 122 ºF (-10 a 50 ºC)
Accuracy (oil)
±0,5 %
Accuracy (coolant solutions)
±1 %
Viscosity range
Up to 2000 mPa.s
Display
LCD with double row digits
Units
Litres, galons, quarts, pints
Batteries
4 x AA 1.5V
Weight (with nozzle and batteries)
4.6 lb (2.1 kg)
Dimensions (without nozzle tube)
11.7” x 3.5” x 6.1” (297 x 89 x 155 mm) (length x width x height)
4
1
3
2