EL/GL Series - Mach 3
MLM990S Quick Reference Guide
Initial Start-up
When your spa is first actuated, it will go into Priming
mode.
Please see the M-7 Installation Instruction Manual
for complete instructions on Power-up and Pump Priming.
The Priming mode will last for up to 4 minutes and
then the spa will begin to heat and maintain the water
temperature in Standard mode. Follow the on screen
instructions. Make your choice, then press Enter (
).
If
left alone, the system will resume after 4 minutes. The
Home display screen will then appear after completion.
To Navigate:
Use the buttons on the front panel to move
within the menu: Up
, Left
, Right
, or Down
.
Enter (
) chooses your menu selection.
J1
J2
BL
LT
HT
FC
OZ
Enter
Jets 2
Jets 1
Light
Blower
102º F
Setting the Time
From the Display Screen, select “Set”, then Enter (
).
Arrow
or
to select “Time of Day”. Enter (
).
Arrow
or
to change hour.
Arrow
to select minutes. Press
or
to change.
Repeat to change AM/PM. To Save and Exit:
.
For quick spa temperature set-up.
From Home screen,
Arrow Up
;
or
to set temperature.
to Exit.
Front Panel Buttons and Lights
For instant activation, press Jets 1, Jets 2, Blower, or Light.
The LEDs will light when activated.
Fast Keys Give Quick Access to System Set-up
Fast Keys allows you to quickly view a device and status,
and to turn it on, off, or change modes (Hi/Med/Low).
(See User’s Manual: “Fast Keys, to Program”.)
From the Home display screen, select
“Fast Keys”, then Enter (
). The circle
represents the four directional keys.
Pressing the designated arrow key will
turn the function to Hi/Med/Low or
On/Off. Press Home (
) to exit.
Jets 1 L
Home
98°F
