background image

 
warranty

Products manufactured by Balboa Water, Inc. are warranted to be free from defects in materials and workmanship 

for a period of two years from date of manufacture.  Should a Balboa product fail to function for any reason during 

the warranty period, Balboa will repair or replace the product at its sole option.  Products modified in any way 

without the express written consent of Balboa are specifically excluded from this warranty.  Balboa does not warrant 

any product against damage from abuse, misuse, improper specification or improper installation.  THIS IS THE 

EXCLUSIVE WARRANTY BEING ISSUED BY BALBOA.  ALL OTHER WARRANTIES ARE SPECIFICALLY EXCLUDED.  

IN NO EVENT SHALL BALBOA BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES 

ARISING OUT OF THE USE OF OR INABILITY TO USE BALBOA’S PRODUCT.  BALBOA’S LIABILITY TO YOU FOR 

ACTUAL DAMAGAES FROM ANY CAUSE WHATSOEVER, AND REGARDLESS OF THE FORM OF THE ACTION 

(WHETHER IN CONTRACT, TORT, PRODUCT LIABILITY OR OTHERWISE), SHALL BE LIMITED TO THE PRICE PAID 

FOR THE BALBOA PRODUCT.  LABOR REIMBURSEMENT IS SPECIFICALLY EXCLUDED FROM THIS WARRANTY.  

THIS WARRANTY IS ISSUED TO THE DIRECT PURCHASER OF THE BALBOA PRODUCT ONLY.

A 25% restocking fee will apply to any product returned within 30 days.  No refunds after 30 days.  No refunds on 

any used product.  No reimbursement for return shipments.

Balboa Water Group

1382 Bell Avenue 

Tustin, CA  92780-6430

www.balboawatergroup.com

1-714-384-0384

IMPOrtant SaFEty InStrUCtIOnS.  rEaD anD 
UnDErStanD PrIOr tO OPEratIOn.  DO nOt DISCarD.

when installing and using this whirlpool bath heater, basic safety 
precautions should always be followed, including those listed below:

rEaD anD FOLLOw aLL InStrUCtIOnS

1.  warnInG:  Risk of Electrical Shock.  Do not permit any electrical appliances (such as a light, 

telephone, radio, or television) within 5 feet of the whirlpool bathtub.

2. DanGEr:  Do not remove the suction cover from the whirlpool bathtub.  Never operate the bath 

if the suction cover is broken or missing.

3.  Use this unit only for its intended use as described in this manual.
4.  to reduce the risk of Injury: Do not permit children to use this unit unless they are closely 

supervised by an adult at all times.

A.  The water in your whirlpool should never exceed 104°F.  Bath water temperature of up 

to 104°F is considered safe for a  healthy adult.  Lower water temperatures are strongly 

recommended for young children, and for anybody who uses the bath for more than 

10 minutes at a time.

B.  Since excessive water temperatures have high potential for causing fetal damage during the 

early months of pregnancy, pregnant or possibly pregnant women should not enter a bath 

with water temperatures in excess of 100°F.

C.  Consult your physician before using the whirlpool if you are using any medication. Abstain 

from the use of alcohol, drugs or medication prior to, or during the use of the whirlpool. 

The use of any of these substances can greatly increase the risk of fatal hyperthermia or 

drowning.

D.  Anyone suffering from low or high blood pressure, circulatory system problems, diabetes, 

obesity, or with a medical history of heart disease should consult a physician before using the 

whirlpool.

5.  warnInG:  rISk OF aCCIDEntaL DrOwnInG.  Extreme caution must be exercised to prevent 

unsupervised access by children. To reduce the risk of accidental drowning, do not permit 

children to use the whirlpool unless they are closely supervised by an adult at all times.

6.  warnInG - rISk OF ELECtrICaL SHOCk.   Every electrical component MUST be grounded and 

a GFCI must protect all branch circuits to the whirlpool.  All electrical work must be performed 

by a qualified electrician in accordance with Article 680 of the National Electric Code and any 

pertaining local codes.

7.  Connect the unit to a supply circuit that is protected by a ground fault circuit interrupter (GFCI).  

The GFCI should be provided by the installer and tested on a regular basis.  To test the GFCI, 

push the Test button.  Upon pressing the test button, the GFCI should interrupt power.  Restore 

power by pressing the Reset button.  If the GFCI fails to operate as described, the GFCI is 

defective.  If the GFCI interrupts power to the tub without initiating a press to the Test button, a 

ground current is flowing and the possibility of an electric shock is indicated.  The tub should not 

be used.  Disconnect the bathtub and call a qualified service technician before continuing use.

8.  warnInG:  Prolonged immersion in hot water may result in hyperthermia.  Hyperthermia occurs 

when the internal temperature of the body rises several ° above the normal body temperature 

(98.6 °F).  The symptoms of hyperthermia include dizziness, lethargy, drowsiness and fainting.  

Hyperthermia can result in:  Failure to perceive heat; Failure to recognize the need to exit the tub; 

Unawareness of impending hazard; Fetal damage in pregnant women; and Physical inability to 

exit the tub.

Bath Heater

Installation and Operation Instructions

®

N A T I O N A L

SPA & POOL

I N S T I T U T E

®

®

®

C

PRODUCT SERVICE

Bauart
gepruft

LISTED

SWIMMING POOL AND

SPA CONTROL

3Z62

LISTED

SWIMMING POOL AND

SPA CONTROL

3Z62

PRODUCT SERVICE

Production monitored

Type tested

®

N A T I O N A L

SPA & POOL

I N S T I T U T E

®

®

®

C

PRODUCT SERVICE

Bauart
gepruft

LISTED

SWIMMING POOL AND

SPA CONTROL

3Z62

LISTED

SWIMMING POOL AND

SPA CONTROL

3Z62

PRODUCT SERVICE

Production monitored

Type tested

P/N 40347 Rev. F

Reviews: