BALAY 3HB558.PE, Instruction Manual

Page: 8 / 20

8
4.
Press the 0 sensor.
The time when the dish will be ready and the end time
symbol y will be shown on the display panel.
5.
Delay the end time using the
@
or
A
sensors.
6.
Press the ºC sensor.
Set the temperature or required grill power using the
@ or A
sensors.
The programmed temperature and the y symbol will be shown
on the display panel, and the oven will be set to standby. When
the oven turns on, the programmed temperature and the
x symbol will be shown. The y symbol turns off.
The cooking time has finished
A signal will sound. The oven will stop heating. The display
panel will show
‹‹
:
‹‹
. Press the
0
sensor twice . A new
cooking time can be set with the sensors
@
or
A
. Or pressing
the
0
sensor and turning the control knob to zero. The oven is
off.
Changing the end time
Press the sensor 0 twice. Change the cooking time using the
@ or A sensors. The altered time is shown after a few seconds.
Do not change the end time if the cooking time has already
started to count down. The final result may not be the same.
Cancelling the end time
Press the
0
sensor three times and reset the end time to the
current time with the
A
sensor. The oven switches on.
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel.
To view the timer
V , the cooking time x , the end time y or
the time 0 , press the 0 sensor repeatedly until the required
symbol lights up. The corresponding value will be shown for a
few seconds on the display panel.
Time
Once the oven has been connected or after a power cut, the 0
and ‹ : ‹‹ symbols light up on the display panel.Set the clock
to the right time.
1.
Press the 0 sensor.
The time is displayed ‚ƒ : ‹‹ .
2.
Set the time with the
@
or
A
sensors.
3.
Confirm the time with the
0
sensor.
The programmed time is displayed after a few seconds.
Changing the time
No other time function must be programmed, the oven must be
switched off.
1.
Press the 0 sensor twice.
The display panel displays 0 .
2.
Set the time with the
@
or
A
sensors.
3.
Confirm the time with the
0
sensor.
The programmed time is displayed after a few seconds.
Hiding the time
The time can be hidden. See the Modifying basic settings
chapter.
Changing the basic settings
This oven has different basic settings. The settings can be
adapted to the user's own needs.
Basic setting Option 0 Option 1 Option 2 Option 3
™‚
Duration of signal after the cooking
time or the time set on the timer
has elapsed
- approx. 10 sec approx. 2 min* approx. 5 min
™ƒ
Time indicator no yes* - -
™„
Time until a setting is applied - approx. 2 sec approx. 4 sec* approx. 10 sec
™†
The shelf support rails have been
refitted.
no yes - -
™‡
Select default settings for all
values.
no* yes - -
* Default setting