Installing the Ladder to the
Balanced Body
®
Avalon Chair
PLEASE READ BEFORE STARTING:
1. Installation of the ladder
should be done on a flat
surface (no carpeted or uneven
surfaces). Failure to do so may
result in ladder misalignment.
2. This procedure requires
using a drill and hammer.
If you are uncomfortable
with this we recommend
that you enlist someone
with hardware installation
experience. Balanced Body is
not responsible for equipment
damages resulting from
improper installation.
TOOLS REQUIRED
»
Drill
»
#2 Philips Screw Driver
»
Hammer
PARTS LIST
Please examine all “loose” hardware contained in plastic bags
before starting. If you feel you are missing any part please
contact Balanced Body Technical Support. Please see Figure A
for proper part orientation.
Part
Part Number Qty.
Wooden Dowel
607-128
1
Wooden Runners
607-353
2
Flat Head Philips #6 x 1
¼
”
wood screw
200-250
8
Flat Head Philips #10 x 1
¼
”
wood screw
GEN9274
2
5
⁄
16
” Drill Bit
TOL1059
1
Propeller nuts
GEN9187
8
Flat Head Philips 2
¼
”
metal screw
GEN9368
4
Flat Head Philips 4” metal screw
GEN9898
4
TO INSTALL
1. Place chair on a solid or firm flat surface before starting install.
Remove storage box if applicable.
2. Install runners on inside of
chair screwing the eight # 6 x
1
¼
” wood screws through the
predrilled holes on runners as
shown in Figure B.
Ladder finshed
Figure A:
a.
4” metal screws
b.
2
¼
” metal screws
c.
#6 1
¼
” wood screws
d.
#10 1
¼
” wood screws
e.
Propeller nuts
f.
5/16” Drill bit
Figure B: Installing runners.
Contact Us
1-800-PILATES | +1-916-388-2838
pilates.com | [email protected]
400-218 | 06.29.18
