background image

How to Assemble the Allegro

®

 Reformer

THIS IS A MEDICAL DEVICE

PARTS LIST

Part number Description

Qty

950-002

Complete footbar

1

950-020

Shoulder bolts and washers

1 kit

950-228

Shoulder rest with brackets

1 pair

616-400

Locking shoulder post

2

GEN8000

Twist lock plunger knobs

2

210-070

Soft Touch Ropes

1 pair

210-064

Double loops (Soft Touch)

1 pair

950-225

Allegro riser with pulley

2

GEN9050

5/16” Allen wrench

1

ALL0060

Allegro wrench

1

SPR9070

Red spring

3

SPR9071

Blue spring

1

SPR9241

Yellow spring

1

UPH7040

Foam Pad for Standing Platform

1

GEN9282

5/32” Allen wrench

1

GEN9472

1/4”-20 Button head screw

2

GEN9054

Split washer

2

618-008

Transport bracket preinstalled  
with wheel

2

IMPORTANT PRECAUTIONS: 

PLEASE READ WARNING

To reduce the risk of serious injury, read the following 

important precautions before using the Allegro.

 

»

Read all instructions in this manual before using the 
Allegro. Review the Setup and Safety video included with 
the Allegro before using the equipment. Use the Allegro 
only as described in these instructions and the video.

 

»

It is the responsibility of the owner to ensure that all users 
of the Allegro are adequately informed of all precautions.

 

»

Use the Allegro only on a level surface. Keep hands and 
feet away from all moving parts. When the Allegro is 
not in use, leave at least two springs connected to the 
carriage. Keep children under the age of 12 and pets away 
from the Allegro at all times.

 

»

If you feel pain, dizziness, or shortness of breath, stop 
exercising immediately.

 

»

Before beginning any exercise program, consult your 
physician.

Contact Us

1-800-PILATES | +1-916-388-2838

pilates.com | [email protected]

17291  | 2021-04

Balanced  Body,  Inc
Sacramento,  CA
001-916-388-2838

EC

EMERGO EUROPE

Molenstraat 15
2513 BH, The Hague
The Netherlands

REP

Balanced Body, Inc.

5909 88th St, 

Sacramento, CA 95828 USA

Summary of Contents for Allegro Reformer



















Reviews: