BALANCE TIME 866433, Manual

Page: 3 / 5

Part A- LCD
A1 : Radio Controlled Time A2 : Temperature and Humidity display
A3 : Radio Controlled Icon A4 : Date and Day of week display
Part B Buttons
B1 : “SET” button B2 : “ ” button
B3 : “ ” button B4 : “WAVE” button
B5 : POWER ON/OFF slide switch
Part C- Structure
C1 : Solar Powered panel C2 : Wall Mount Hole
C3: Stand
Start-up
Push the “POWER ON/OFF”(B5) slide switch to on the unit.
Radio Controlled Clock:
After start-up the clock will scan the DCF time signal ( “ ” flashes on the
LCD ). Buttons will not function while scanning for DCF unless they are well
received or stopped manually.
The clock automatically scans the time signal at 3.00 a.m. everyday to
maintain accurate timing. For failed reception, scanning stops ( “
” on the
LCD disappear ) and repeats again at 4.00 a.m. 5.00a.m. and 6.00a.m.
The clock manually scans the DCF time signal by holding “
WAVE
” button (B4)
for 3 seconds. For failed reception, scanning stops. ( “ ” on the LCD
disappear ).
Press “
WAVE
” button (B4) to stop scanning when receiving DCF time signa
l.