PanaFlow™ LC User’s Manual
25
Chapter 3. Programming
Chapter 3. Programming
3.1
Introduction
This chapter has instructions for programming various features of the
PanaFlow LC
flow transmitter. In this chapter,
we will list all available options. The user can then change the
User Preferences
and
Inputs/Outputs
settings,
Programming
for flow measurements and
Calibration
to meet their needs.
IMPORTANT:
Only qualified and trained personnel are allowed to change and validate Safety parameters. Please
refer to the XMT1000 safety manual for details on these parameters. Not all users will have access to all of
the menus. Some menus are restricted to only those users with the proper passcodes.
3.1.1
HMI Features
Figure 32: PanaFlow LC HMI
The six keys on the magnetic keypad are used to program the PanaFlow LC:
Key Symbol
Key Name
Functions
Escape Key
To cancel a numeric entry change, exit a menu or as Back key
Enter Key
To accept a numeric entry or select a menu option
Left Arrow Key
To navigate among menu choices, pages or set cursor position
Right Arrow Key
To navigate among menu choices, pages or set cursor position
Up Arrow Key
To navigate among menu choices, pages or increase/decrease
numeric entries
Down Arrow Key
To navigate among menu choices, pages or increase/decrease
numeric entries
Summary of Contents for Panametrics PanaFlow LC
