Baker Panametrics PanaFlow LC, User Manual, Page: 22 / 68

Chapter 2. Installation
14 PanaFlow™ LC User’s Manual
To mount the transducers into a clamping fixture, complete the following steps:
1.
To ensure that the minimum bend radius of the cable is met, the cable adapter is added in series with the
transducer cable assembly and the transducer. Connect the transducer cables to the BNC connectors on the
transducers, ensuring that the labels on the cables match with the transducers. For example, the cable labeled
'downstream' must be connected to the downstream transducer.
Figure 17: Transducer Cable Connection with Cable Jumper, PN133M7313-03
Figure 18: Transducer Mounting, Step 1
2. Apply a thin bead of couplant to one of the transducers. A bead approximately the size of a toothpaste bead
should be placed down the center of the transducer face.