Model CTF878 Programming Manual
41
Chapter 2. Displaying and Configuring Data
3.
Press
[F3]
(
Yes
) to confirm the assignment and close the window. (Press
[F2]
(
No
) to close the window without
changing the key.)
Figure 46: Display Screen with Modified Softkey
•
To clear a softkey:
1.
From the Site Menu (shown in Figure 42 on page 38), use the [
] or [
] arrow keys to move to the FKeys entry
on the menu. Press
[ENTER]
. The screen now appears similar to Figure 44 on page 40.
2.
Use the [
] or [
] arrow keys to move to the desired Clear FKey (1, 2 or 3) entry on the menu. Press
[ENTER]
.
The softkey window clears. You can also clear the softkey through the Configure FKey window, by selecting (
Clear
) as
an entry, pressing
[ENTER]
and then
[F3]
(
OK
).
Note:
Since the customized softkeys are saved globally, they will remain, even if you change site files.
2.7 Accessing Meter Data —The About Option
The About option displays useful information concerning the model number and software version of any given
CTF878. While the window normally appears briefly at startup, users might want to access the information for a
longer period. To open the About window, scroll to the About option on the Site Menu and press
[ENTER]
. The screen
appears similar to Figure 47 below. To access data on your specific CTF878, press
[F2]
(Next).
Figure 47: The About Window
To return to Operate Mode, press
[ESC]
or
[F3]
(Exit).
-10000
10 Minutes
10000
0
-5000
-2000
2000
5000
Save Now
Program Meter Logging Service
Site Manager
Site
Velocity, m/s
Panametrics
CTF Flowmeter
Copyright ©2002 Baker Hughes Co.
All rights reserved.
This product is protected by copyright law
and international treaties.
Unauthorized distribution, decompilation,
or reverse engineering may result in
severe civil and criminal penalties.
Next
Exit