Chapter 2. Displaying and Configuring Data
40
Model CTF878 Programming Manual
2.6.2 Customizing Softkeys
When the screen is in Operate Mode, you might wish to access a particular submenu frequently without the trouble of
scrolling through menus. Customizing the softkeys (
[F1]
,
[F2]
and
[F3]
) allows you to access up to three submenus
by pressing the associated softkey. You can customize a softkey from the Site Menu or from within a particular menu.
•
To customize a softkey from within the Site Menu:
1.
From the Site Menu (shown in Figure 42 on page 38), use the [
] or [
] arrow keys to move to the FKeys entry
on the menu. Press
[ENTER]
. The screen now appears similar to Figure 44 below.
Figure 44: FKeys Menu
2.
Use the [
] or [
] arrow keys to move to the desired FKey
(1, 2 or 3) entry on the menu. Press
[ENTER]
. The Configure FKey window opens, as shown in Figure 45 below.
Figure 45: Configure FKey Window
3.
Use the [
] or [
] arrow keys to scroll to the desired submenu (for example, Site Manager).
4.
Press
[ENTER]
to confirm the entry, and press
[F3]
(
OK
) to confirm the entry and close the window. (Press
[F2]
(
Cancel
) to close the window without changing the key.)
The screen now appears similar to Figure 46 below, with the
[F1]
window displaying “Site Manager.” Pressing
[F1]
opens the Site Manager window.
•
To customize a softkey from a particular menu:
1.
Open the desired menu on the Menu Bar (see other chapters for details on particular menus) and scroll to the
desired option.
2.
Press the desired softkey. A window appears with the question, “Assign current menu command to FKeyX?”
Program Meter Logging Service
Save Now
1 View
2 View
3 View
4 View
Site Manager
About
F2
F3
Clear F1
Clear F2
Clear F3
Save Now
D
Transducer
Site
Velocity, m/s
Cross Corr
FKeys
F1
OK
Cancel
Select a menu item
Site Manager
Save Now
1 View
2 View
Configure FKey
CLEAR