Chapter 1. Programming Site Data
12
Model CTF878 Programming Manual
1.8
Entering Path Parameters
To enter the Path option, scroll to the Path tab on the Program Menu and press
[ENTER]
. (From the Fluid window, you
can scroll back up to the Fluid tab, and press
[ENTER]
.) The screen appears similar to Figure 13 below. To step through
each parameter, press the [
] key. Refer to
Program Menu Map
Figure 13: Path Window
Transducer Pipe Fluid
Tag Path
OK
Cancel
152.4 mm
Txdr Spacing
69.85 mm
Transducer/Pipe
Path