Baker Panametrics CTF878, Programming Manual, Page: 30 / 88

Chapter 1. Programming Site Data
24 Model CTF878 Programming Manual
1.13.2 Entering Inputs
Note: You can access the Inputs entry only if you selected Enabled for Standard Volume under the Settings tab.
Use the arrow keys to move to the Inputs tab and press [
ENTER
] to confirm your selection. The screen appears similar
to Figure 28 below. Use the [

] key to move from one line to the next. Refer to the Program Menu Map , Figure on
page 29.
Figure 28: Standard Volume Window - Inputs
1. The first prompt allows you to fix the Pressure value or to render it active.
a.
Use the arrow keys to move to the appropriate choice.
b. Press [
ENTER
] to confirm your choice.
Note: If you selected
Fixed
, continue on to step 2 to enter a value for the pressure. If you selected
Active
, you will
not be able to enter the
Pressure
box and must proceed to step 3.
2. To enter a value for the pressure:
a.
Press the [

] key to move to the
Pressure
box.
b. Press [
ENTER
] and use the number keys to enter a value for the pressure.
c. Press [
ENTER
] to confirm your entry.
3. To designate an option card number:
a.
Use the arrow keys to move to the Input # box.
b. Press [
ENTER
] to open a scroll-down menu.
c. Use the key to scroll to the appropriate value and press [
ENTER
] to select the appropriate option card
number.
4. The next prompt allows you to fix the Temperature value or to render it active.
a.
Use the arrow keys to move to the appropriate choice.
b. Press [
ENTER
] to confirm your choice.
Note: If you selected
Fixed
, continue on to step 5 to enter a value for the temperature. If you selected
Active
, you
will not be able to enter the
Temp
box and must proceed to step 6.
Settings
OK Cancel
Fixed Active
Pressure
Pressure Bar 1.0132 2:A
Input #
°F Temp
Temperature
60
Fixed
Input #
2:A
Active
Standard Volume
Inputs