Baker Panametrics CTF878, Programming Manual, Page: 29 / 88

Model CTF878 Programming Manual 23
Chapter 1. Programming Site Data
1.13 Entering Standard Volume Data
The Standard Volume option enables you to set base measurements and specific values for pressure and
temperature inputs and to select the corresponding option cards. To enter this option, scroll to Standard Volume on
the Program Menu and press [
ENTER
].
1.13.1 Entering Settings
The screen appears similar to Figure 27 below. To step through each parameter, press the [

] key. Refer to the
Program Menu Map , Figure on page 29.
Figure 27: Standard Volume Window - Settings
1. The first prompt allows you to enable or disable the Standard Volume settings.
a.
Use the arrow keys to move to the appropriate choice.
b. Press [
ENTER
] to confirm your choice.
Note: If you selected
Enabled
, continue on to step 2 to enter values for the three categories. If you selected
Disabled
, you will not be able to access the three boxes or the Inputs entry.
2. To enter numbers for the three categories:
a.
Press the [

] key to move from one box to the next.
b. Press [ENTER] and use the number keys to enter a value for each category.
c. Press [ENTER] to confirm each entry.
Inputs
1.01 Base Pressure
OK Cancel
Enabled Disabled
Standard Volume
Bar
Atmospheric Pressure Bar 1.01
Base Temperature °F 60
Standard Volume
Settings