Baker Panametrics CTF878, Programming Manual, Page: 23 / 88

Model CTF878 Programming Manual 17
Chapter 1. Programming Site Data
1.10 Entering Analog Outputs
The Analog Output option enables the set up of additional output parameters. To enter the option, scroll to the
Analog Output entry on the Program Menu (see Figure 20 below) and press [ENTER] .
Note: Input/Output Menu options may appear in a different order, depending on where each option card is
installed. Cards are numbered from right to left.
Figure 20: Analog Output Option Window
The screen appears similar to Figure 21 below. To step through each parameter, press the [

] key. See the Program
Menu Map , Figure on page 29.
Figure 21: Analog Output Window
Transducer
Site Program Meter Logging Service
Pipe
Fluid
Path
Standard Volu
User Functions
Correction Fac
Main Board (0)
0 50 100
AnalogOut(2:B)
AnalogOut(2:C)
AnalogOut(2:D)
AnalogIns (1)
A
Digital Outputs
R
Program
elocity, m/s
IO
Analog Outputs (2)
AnalogOut(2:A)
Span
Data Source
Zero
OK Cancel
Analog Out
Hold Last
NO UNIT
On Error
0
100
4-20 Out Setup
Off