Chapter 1. Programming Site Data
16
Model CTF878 Programming Manual
a.
Press
[ENTER]
to enter the text box. The text creation window appears, as shown in Figure 19 below.
Figure 19: Text Creation Window
b.
Use the four arrow keys to scroll to the desired letter or symbol, and press
[ENTER]
to add the letter to the
name.
Note:
Pressing
[SEL]
causes the screen to show successively a set of upper-case (capital) letters, a set of
lower-case letters, and a set of symbols. Use all three screens to create a desired label.
c.
Repeat this procedure for each letter or symbol you wish to add to the name (up to a total of eight
characters). If you wish to delete a letter, press
[F1]
(Delete) to erase each letter or symbol, from right to left
on the label.
d.
When you have completed the label, press
[F3]
(OK) to confirm the label, or
[F2]
(Cancel) to leave the
window without adding the label.
4.
The next three prompts ask for the function units, the zero input value, and the span input value. For each prompt:
a.
Press
[ENTER]
to enter the text box.
b.
Use the numeric keys to enter the desired value.
c.
Press
[ENTER]
to confirm the entry.
You have completed entering data for general-purpose inputs.
•
To confirm the entries and return to Operate Mode, press
[F3]
(OK). The CTF878 returns to Operate Mode.
•
To leave the window without confirming the entries, press
[F2]
(Cancel) or the
[ESC]
key. The CTF878 returns to
Operate Mode.
OK
Cancel
Delete
'
4
U
K
A
=
5
V
L
B
<
6
W
M
C
>
7
X
N
D
8
Y
O
E
9
Z
P
F
0
Q
G
/
1
R
H
,
2
S
I
"
3
T
J