Chapter 1. Programming Site Data
14
Model CTF878 Programming Manual
1.9
Entering Analog Inputs
The Analog Input option enables you to specify parameters for general purpose inputs. To enter the Inputs option,
scroll to the
Input/Output (
IO
) entry on the Program Menu and press
[ENTER]
. The screen appears similar to Figure 15 below. To
step through each parameter, press the [
] key. Refer to the
Program Menu Map,
Figure 15: Input/Output Option Window
Note:
Input/Output Menu options may appear in a different order, depending on where each option card is
installed. Cards are numbered from right to left. The number shown in parentheses is the option card slot
number.
1.
Scroll to AnalogIns and press
[ENTER]
to confirm your selection. Another drop-down menu as in Figure 16 below
appears.
Figure 16: Analog Inputs Option Window
Transducer
Site Program Meter Logging Service
Pipe
Fluid
Path
Standard Volu
User Functions
Correction Fac
Analog Outputs (2)
Digital Outputs (3)
Alarms (4)
RTDs (5)
0
50
10
AnalogIns (1)
Program
elocity, m/s
Main Board (0)
IO
IO
Transducer
Site Program Meter Logging Service
Pipe
Fluid
Path
Standard Volu
User Functions
Correction Fac
Main Board (0)
Digital Outputs (3)
Alarms (4)
RTDs (5)
0
50
10
AnalogIn(1:B)
Analog Outputs (2)
Program
elocity, m/s
IO
AnalogIns (1)
AnalogIn(1:A)