Page 39 of 61
Hypoxic Cycle
The Hypoxic Cycle menu is accessed from Screen 3 to allow for dynamic changing of the
Oxygen and Carbon Dioxide levels over fixed time periods. The initial setting to for
continuous cycling for up to 3 set-points.
Screen 15: Hypoxic Cycle Menu - Continuous Cycle On
The timing values define how long the Oxygen and Carbon Dioxide levels are maintained
for once they have been achieved. This mean that there is a time period between the steps
that is not able to be set as it is dependent on the difference between the set-points within
the gas control software.
Pressing on any of the values will bring up a dialogue box to enter in the required setting.
If only 2 values are required for the cycling then set step 1 and 2 as required, then set step
3 time period to 0 minutes with the O
2
and CO
2
set-points the same as step 2.
Once the setting are correct then press the start button to begin the cycling. At this point
the start button will change to a spot button. The continuous cycling will stop by pressing
the Stop button or by pressing the home icon to return to the main menu.
