Baker Druck PACE1000, Important Safety Instructions And Installation Manual, Page: 9 / 146

Copyright 2010 Baker Hughes Company.
English–PACE1000 Safety Instructions | 3
Packaging
Check the contents of the PACE1000 packaging with the list that follows:
i.
PACE1000 Pressure Indicator.
ii. Adaptor, power supply (Druck part number IS1000118M9922 - 12).
iii. Installation guide and safety instructions.
iv. Calibration certificate.
1. Preparation for Use
The instrument can be used as a:
•
Free-standing instrument positioned on a horizontal surface.
• Panel-mounted using the panel-mount option kit (Refer to K0470, Section 2.6, Mounting
Kits).
• Rack-mounted in a standard 19 inch rack using the rack-mount option kit (Refer to K0470,
Section 2.6, Mounting Kits).
• For free-standing instruments, the feet on the front of the base can be used elevate the
instrument to a better viewing angle.
Note: Allow a free flow of air around the instrument, especially at high ambient temperatures.
Key to Figure A1
a. Single port instrument.
b. Two port instrument.
c. Three port instrument.
d. Remote sensor instrument.
1. Power supply connector.
2. Electrical rating.
WARNING
Do not use with media that has an oxygen concentration > 21 % or
other strong oxidizing agents.
This product contains materials or fluids that may degrade or combust in the
presence of strong oxidizing agents.
Turn off the source pressure(s) and carefully vent the pressure lines before
disconnecting or connecting the pressure lines. Proceed with care.
Only use equipment with the correct pressure rating.
Before applying pressure, examine all fittings and equipment for damage.
Replace all damaged fittings and equipment. Do not use any damaged fittings
and equipment.
Do not exceed the maximum working pressure of the instrument.
This equipment is not rated for oxygen use.
RISK OF ELECTRIC SHOCK
Isolate the power supply before making any
electrical connections to the rear panel.
INFORMATION
After unpacking a cold instrument, allow time for it to
stabilize and any condensation to evaporate.