Baker Druck PACE1000, Important Safety Instructions And Installation Manual, Page: 14 / 146

Copyright 2010 Baker Hughes Company.
8 | PACE1000 Safety Instructions–English
2. Set the power supply isolator to OFF.
3. Connect the power adaptor before sliding the instrument into the rack.
4. Set the power supply isolator to ON.
5. Check that the front panel display shows the power-up sequence (Refer to K0470,
Section 3.2, Power-up Sequence).
5. General Specification
6. Return Goods/Material Procedure
If the unit requires calibration or is unserviceable, return it to the nearest Druck Service Centre
listed at: https://druck.com/service .
Contact the Service Department to obtain a Return Goods/Material Authorization (RGA or RMA).
Provide the following information for a RGA or RMA:
•
Product (e.g. PACE1000)
• Serial number.
• Details of defect/work to be undertaken.
• Calibration traceability requirements.
• Operating conditions.
Item Specification
Display LCD: Color display with touch-screen
Operating temperature 10°C to 50°C (50° to 122°F)
Storage temperature - 20°C to 70°C ( - 4° to 158°F)
Ingress protection IP20 (EN 60529)
Operating humidity 5% to 95% RH (non-condensing)
Vibration MIL - PRF - 28800 Type 2 class 5 style E/F
Operating altitude Maximum 2000 metres (6560 ft)
EMC EN 61326
Electrical safety EN 61010 - 1, UL 61010 - 1, CSA 22.2, No. 61010 - 1 and IEC 61010 - 1
Power adaptor Input range: 100 - 240VAC, 50 to 60Hz, 600 - 300mA, Installation category II
Pressure safety Pressure Equipment Directive - class: sound engineering practice (SEP) for
group 2 fluids.
Pollution degree 2
Operating Environment Indoor use only. Not rated for use in potential explosive atmospheres.
Pressure media Not rated for oxygen or other explosive gases or liquids.