Baker A, User Manual, Page: 29 / 38

29
MAINTENANCE TASKS AND CHECKLIST
Note: Follow Lockout / Tagout prior to performing any checks or maintenance.
Daily

Use an air-hose to blow-off the dust and wood chips that accumulate in and around the
machine, especially the wheels.

Check band blade tracking

Check head rig v-belts

Check guides for adjustment

Check proper conveyor belt tracking
Note: The machine operator is closer to the operating mechanism of the machine during
clean up than during production – extra care should be taken.

Do NOT clean with flammable or combustible materials.

Follow applicable codes and standards with regards to:
o
Ventilation and monitoring of work area for excessive accumulation of
hazardous vapors
o
Wearing personal protective equipment for handling materials
o
Using proper procedure for disposing of all waste materials
Weekly

Check all setscrews

Grease 28” wheel bearings
Monthly

Grease slow moving bearings
Every 3 Months

Motors should be greased with one pump of grease from a grease gun