Communications Options User’s Guide
33
Chapter 3. Modbus Over Ethernet Communications 2
3. Modbus Over Ethernet Communications 2
IMPORTANT:
These setup instructions apply only when using option card
703-1476-05, rev. B
and
higher
, or option card
703-1477-03, rev. D
and
higher
.
3.1
Introduction
This document provides instructions for setting up a flowmeter equipped with
Modbus Over Ethernet (Modbus/TCP)
communications. To apply these procedures, the flowmeter must have the option card installed. See the option card
examples in Figure 14 and Figure 15.
Note:
To install an option card, consult the user’s manual(s) which apply to your instrument.
Figure 14: DF/GX Modbus Over Ethernet Option Card
Figure 15: XMT Modbus Over Ethernet Option Card
