Baker Hughes Panametrics Sentinel LCT8, User Manual, Page: 75 / 138

3.6.5 Setting up an RTD input (optional)
If an option card with an RTD input is installed, to set up the RTD input , refer to Figure 67 below and complete the steps on the
next page.
NOTE: If necessary, refer to Table 4 on page 23 as a reminder about color code meanings.
Figure 67: Setting Up an RTD input
Legend
Green At least user 3 level access required to follow the step.
Dotted
green
Not all transitional screens are shown (at least user 3 level
access required).
Green Option only visible to user 3 or above.
65