Baker Hughes Panametrics Sentinel LCT8, User Manual

Page: 64 / 138

Figure 60: Setting Up an analog output
Legend
Green At least user 3 level access required to follow the step.
Dotted
green
Not all transitional screens are shown (at least user 3 level
access required).
Green Option only visible to user 3 or above.
Use

or

arrow to
highlight the preferred
option and press  twice
to confirm selection.
Displayed units
depend on the
“unit type” and
“publisher”
selections
Follow similar
steps to also set
the “span”
“Force value
option has
additional screens
that allows setting
the preferred mA
value
“Passive” requires
an external
power supply,
while “active” is
internally powered
by the electronics.
54