Baker Hughes Panametrics Sentinel LCT8, User Manual, Page: 123 / 138

[no content intended for this page] Appendix B.
Service record
B.1 Introduction
Use this appendix to record information that will be
beneficial if the meter needs to be updated or for
troubleshooting purposes. Whenever an issue occurs or any
service procedure is performed on the Sentinel LCT8 , the
details should be recorded in this appendix. An accurate
snapshot of the meter, as well as the history of the meter,
can prove very helpful in troubleshooting any current or
future problems.
NOTE: For instructions on how to find the diagnostic
parameters listed in the tables in this appendix, refer
to Flow info on page 94 .
113
B.2 User defined settings for the
input/output connections
Table 21: Analog inputs
Parameter Analog input (example)
Analog input #1
AIN1
Analog input #2
AIN2
Analog input #3
AIN3/RTD
Label Ain1
Model Temperature
Units °C
Base (4 mA) 10
Span (20 mA) 50
Table 22: Analog output
Parameter Analog output (example) Analog output
Loop status Off
Channel Composite
Publisher Volumetric
Units Liter/min
Base (4 mA) -12.2 l/m
Span (20 mA) 12.2 l/m
Error level Hold value
Mode Passive
113