Baker Hughes Panametrics MTS6, User Manual

Page: 45 / 106

Moisture Target Series 6 User’s Manual 37
Chapter 3. Operation and Programming
3.4.8 Testing the Alarm Relays
To test the alarm relay, and devices connected to it, from the
Alarm Menu
select
Test
and
press
Enter
. A screen similar to the following appears.
Use the left and right arrow keys to select
Reset
or
Trip
and press
Enter
. If
Reset
was
selected, the message
Alarm is RESET
appears. If
Trip
was selected, the message
Alarm is
Tripped
appears. Press
Cancel
to return to the
Alarm Menu
.
3.5 Logging
3.5.1 Checking the Data Log Status
To check the data log status, from the
Logging Menu
select
Status
and press
Enter
. A
screen similar to the following appears.
The current data log status is displayed. After about 10 seconds, the screen returns to
the
Logging Menu
.



