Baker Hughes Panametrics Aurora H2O, User Manual

Page: 58 / 92

4.9 Aurora H2O information
To check the Aurora H2O
information, from the main
menu select about and
press enter. The following
screen appears.
4.9.1 Checking the ID
To check identification
information, select ID
and press enter. A screen
similar to the following
appears.
To return to the about
menu, press enter.
4.9.2 Checking the system status
To view the status of the
Aurora H2O system, from
the about menu select
system status and press
enter. A screen similar to
the following appears.
Uptime: is the elapsed
time since the Aurora H2O
was powered on or reset.
Started: is the date and
time that the Aurora H2O
was last powered on/reset.
Start temp : is the laser
housing temperature
as measured at the last
startup/reset.
Laser hours: indicates the
total lifetime that the laser
has been energized.
To return to the about
menu, press enter.
4.9.3 Checking the software
To view the software
versions being used, from
the about menu select
software versions and
press enter. A screen
similar to the following
appears.
To return to the about
menu, press enter.
4.9.4 Checking the gas composition
To view the gas content,
from the about menu
select gas composition
and press enter. A screen
similar to the following
appears.
To return to the about
menu, press enter.
48