Baker Hughes Panametrics AquaTrans AT600, User Manual

Page: 63 / 174

AquaTrans™ AT600 User’s manual 53
Chapter 4. Initial setup and programming
4.6.4 Programming digital communications
The AT600 flow meter supports the following digital communication types:
• Modbus
• HART
A password is required to activate the digital communications options. In case of problems, contact Panametrics for
assistance.
4.6.4.1 Modbus
Selecting the baud rate
Selecting the Modbus address
To set up Modbus, select digital
comm on the input/ output screen
and press [√]. The following screen
opens.
Press [√] again, and a screen similar
to the following opens.
To set the baud rate, select baud
rate and press [√].
A screen similar to the following
opens.
The default baud rate is 115200. To
change the default, select the
desired baud rate and press [√] to
return to the previous screen.
To set the address, select Address
and press [√]. A screen similar to the
following opens.