Baker Hughes Panametrics AquaTrans AT600, User Manual

Page: 50 / 174

Chapter 4. Initial setup and programming
40 AquaTrans™ AT600 User’s manual
4.5.5 Display
4.5.5.1 Backlight
4.5.5.2 Timeout
Note:
The default value for the timeout is 0
Use the [

] or [

] key to select a specific digit,
then use the [

] or [

] key to change that
digit as required. After all digits are correct,
press [√] to save. Then, press [x] to return to
the previous screen.
The default password is 1111.
To turn the backlight OFF or ON, use the
[

] or [

] arrow key to select display and
press [√]. The following screen opens.
Select backlight, and press [√] to open a
screen similar to the following.
Select OFF or ON, and press [√] twice to
return to the previous screen.
To provide a timeout, select timeout and
press [√]. A screen similar to the following
opens.